HOME
  ABOUT US
  MINING MACHINE
  TECHNOLOGY
  NEWS
  CONTACT US
  SERVICE
Beneficiation-Equipment
Sand-Equipment
AAC-Equipment
Drying-Equipment
Grinding-Mill

 

MINING MACHINE Position:Home > Mining machine   
DETAILS
CT Permanent magnetic drum separator surface magnetic field intensity is much more than the average permanent magnetic separators, easy for operation management and maintenance, in all kinds of mineral processing site using has remarkable energy saving performance. And LanJi CT permanent magnetic drum separator machine is suitable for the following magnetite, magnetic pyrite mine, baking, titanium iron ore material such as wet magnetic separation whose size is less-than 3 mm, also used in coal, non-metallic mining, building materials material and so on.
DETAILS
Spiral chute is applicable to material separation of size 0.3 - 0.02 mm, such as of Iron ore, Ilmenite, Chromite, Pyrite, Zircon and Rutile, Monazite, Tungsten ore, Tin, Tantalum ore, Niobium mine and other non-ferrous metals, precious metals and non-metallic minerals, which with proportion differences. Spiral chute is gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. Spiral Chute is made up of feeder, feed chute, spiral flute, bracket, intercepting slot, and supporting frame, etc.
DETAILS
Shaking table is a mine selecting machine for fine materials working by gravity. It is widely used in selection of Tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal.
DETAILS
Using jigger for mineral ores is one of the gravity selecting methods. It belongs to the deep groove separation. It use water as media and make use of different proportion to selection different metals. Most of the Jigger belongs to the diaphragm type. The jigger is widely used in gravity of selecting for the tungsten, tin, gold, hematite, manganese, titanium, antimony, lead, tantalum and niobium.The jigger has the following advantages, such as: a wide range of selecting sizes, highcapacity, small standing area, high productivity and features of easy to operate and maintenance.
DETAILS
The machine is driven by the V-belt drive motor rotating impeller,and mixes the drugs and pulp evenly. It is the necessary equipment of increasing the medicine effect time and strengthening the medicine quality. It fits benificiation industry, and every chemical industry mixing. For all kinds of metal ore, this machine is mainly used for mixing the pre-flotation, so that it can mix the medicine and pulp fully. And it can also be used for mixing other non-metallic minerals. It is suitable for pulp with density of no more than 30 %( by weight), and the size of the fixed component of the slurry particle is less than 1mm. It has a cylindrical radial circulation mechanical blending form with the spiral impeller and flat bottom.
DETAILS
Applicable to concentrator concentrates and tailings dewatering, is widely used in metallurgy, chemical industry, coal, non-metallic mineral processing, environmental protection and other industries.The High efficiency concentrator machine of our company is suitable for dehydrating water of the concentration and gangue in the concentrating factory which can make the mash of 20-30% raise up to 40-70% about.Efficient Thickener settlement actually is not a simple device, but a combination of the mud layer filtering feature a new type of dehydration equipment.
DETAILS
This series screens are always used in processing minerals such as ferrous metals including hematite & magnetite and nonferrous metals including Lead, Zinc, Gold and Silver etc. This machine works in a re-circulating network with ball mill, which can upgrade the fineness of ferrous and nonferrous metals.
DETAILS
GZ Series electromagnetic vibrating feeder mainly used for mining , metallurgical , chemical , coal , machinery and other industries , could feed the block ,grain , and powder materials evenly and continuously in to the accepting machine . Being diversification , this series of produts can be specially designed and produced according to the customers'need . Furthermore , all types of electromagnetic vibration feeder , can be easily implemented manual or automatic control .
DETAILS
The structure of energy saving ball mill is design based on the original ball mill. The machine body and the bottom frame is integral, so that it can be craned and put on the base in one step. Double-row self-aligning spherical roller bearing replaces babbit-lined bearing. Friction resistance is greatly lowered down, easy to start and energy saving. Its energy consumption is reduced by 30%, and the discharge mode of materials is force by grate, instead of control discharge by overflow, so that the fineness of milled materials is promoted, and the processing volume is increased by 15-30%. If you are interested so please feel free and send inquiry to us for more details.
DETAILS
Impact Crusher adopts the newest manufacturing technology and unique structure design, so the discharged product is with cubic and perfect shape, no tension and crack. This crusher can crush materials with size smaller than 500mm and resisting strength less than 350MPa, such as granite, limestone, concrete aggregate, etc.
DETAILS
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. cone crusher has the features of big crushig ratio,stable structure, high efficiency, easy adjustment, economic operation,low operating cost, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing .
DETAILS
Hydraulic cone crusher is made up of movable cone, fixed cone, transmission agent, lubricating system, hydraulic system, base, principal axis, eccentric bearing bushing, bowl liner and hopper. SMH series hydraulic cone crusher designed by our company is a new type of cone crusher with international advanced level which brings in Germanic technology. Our hydraulic cone crusher greatly increases the production capacity, crushing efficiency and is suitable for replacing spring cone crusher and common hydraulic cone crusher in the mining and construction industry.SMH series hydraulic cone crusher and is the most ideal equipment for large-scale stone factory and mining crusher.
DETAILS
PCX type impact crusher is efficient in absorbing advanced technologies at home and abroad, combined with the relevant industry specific working condition and development of the latest generation of high efficiency fine crusher, used in all kinds of medium hardness solid materials in the cement industry, finely, limestone, gypsum, finely clinker, mixed material, etc. Still can finely calcium phosphate, dolomite, perlite ore, etc. Can be widely used in building material, chemical fertilizer, mining and refractory materials and industry departments.
DETAILS
Hammer crusher with big crushing ratio (general 10-25, high 50), high productive capacity, the product equality, low energy consumption , simple structure, easy to maintain andsimple in operating. Hammer crusher for crushing all kinds of hard and abrasive weak materials. The material compressive strength does not exceed of 100Mpa, Moisture content is less than 15%. Broken material is coal, salt, chalk, gypsum, brick, limestone etc. It also can broke fiber structure\more flexibility and toughness of the broken wood, paper, waste of asbestos cement, recycling of asbestos fibers and so on.
DETAILS
Ring hammer crusher for crushing all kinds of hard and abrasive weak materials. The material compressive strength does not exceed of 100Mpa, Moisture content is less than 15%. Broken material is coal, salt, chalk, gypsum, brick, limestone etc. It also can broke fiber structure more flexibility and toughness of the broken wood, paper, waste of asbestos cement, recycling of asbestos fibers and so on...Besides, Hammer crusher can be used not only in broken production line, sand production line system, but also can replace the cone crusher in the mineral processing production line.
DETAILS
Double roller crusher apply to the crushing of medium or lower-hardness mines and rocks with medium or lower rigidity in mine selection, chemicals, refractory materials ,cement and building materials industrial production, such as limestone, slag, coke, coal . The two gear roller is lubricate by the oil pump,the material is crushed by the gear roller .Double roller crusher can adjust the clearance between rollers and drive through triangle belt or multidirectional shaft coupling, and the four roller crusher will do it only through triangle belt. Double roller crusher has the characteristics of simple structure, compact, lightweight, reliable work,large broken capacity.
  2/4  home Page on next page finally

Home    About us    Mintng Machine    Technology    News    Contact us    竞彩足球比分推荐310
All rights reserved:Henan LanJi Machinery Manufacturing Co.LTD   Address:Crossroad of Xi sihuan road &Hua gong road Service hotline:0086-371-67790366 
fax:0086-371-67790366 E-mail:[email protected] 銅礦選礦設備 竞彩足球比分推荐310 鐵礦選礦設備